LScreen all incoming materials for hazardous substances, disassemble products into homogeneous materials, and test each material to meet the RoHS directive; x-ray also has metal composition analysis function, which can determine element number 13 (Al) ~ 92 (U)

Various dimensions of the product are measured, including: shape and position tolerance, position, parallelism, flatness, contour, straightness, cylindricity, roundness, etc., with an accuracy of 1.8um, which can accurately detect all kinds of dimensional defects,meet the ISO1101 ASME Y14.5 standard

Simulate and recreate the reliability of products in various environments to accelerate aging. The temperature range is -75℃-300℃, the humidity range is 5%-98%, the conversion rate is 1-25℃/min, and the cabinet size is 1m³

Testing standard:
ISO3768 ASTM-B117 ASTM-B268
GB/T2423 GB10592 IEC60068-2 …
GJB150.5 …
GJB 150.3 …
GB4208 IEC60529…

Product heat dissipation performance testing, product clamping force testing, material conductivity testing, water pump performance testing, fan performance testing, system impedance measurement, through a variety of testing, to provide thermal solutions for design requirements.

We let samples in the dissolution, filtration and extraction processing, and through chemical methods to detect, we use GC/MS, ICP and other equipment to test o-benzene hazardous substances, copper, aluminum, alloys, steel and other metal components.

Using chemical methods to detect and analyze the phthalic harmful substances, metal composition,etc.. The detection limit can reach 1ppm, which is suitable for IEC62321、EPA3550、EN14372 and other standards

The background noise is 6dB (a) below, which can meet the requirements of sound pressure level, sound power and sound quality measurement, cooperate with thermodynamics, wind tunnel test, etc., to make the best efficiency solution for the development of low noise and heat dissipation products

Simulate the vibration environment of the product during manufacturing, transportation and use, for detecting early faults and simulating the structural strength test of the product;

Test the damage of the product from falling, and evaluate the impact strength of the product during transportation and handling.Free drop test can be done on the angle, edge and surface of the package.

Provide product impact environment in the process of use, loading and unloading, transportation, used to find and determine the weak link of the product, the integrity of the assessment of product structure.

Applicable standards:GB/T 4857.23,10 GBT 2423.10 IEC6 0068-2-6 …
ISO 2248 JIS Z0202-87 GB/T4857.5 IEC 60068-2-32 …
GB/T 2423.5 IEC6 0068-2-27 …

At the early stage of product design, FloTHERM creates a virtual model of the product to predict the airflow, temperature distribution and heat transfer process inside the product, and then optimizes the product according to the simulation results to finally select a product structure that meets the requirements, reducing repetitive proofing, shortening the development cycle and reducing costs.

Check product coating thickness, welding, anchoring and other tensile force limit, roughness, packing material rupture strength, screw torque resistance, spring K value, Wechsler hardness of metal materials, etc., to assist the determination of abnormal analysis of products.

Testing the hardness of baking varnish,surface treatment and pencil hardness.

Timing calibration of the whole company's measuring instruments, independent research and development of the calibration system, starting 15 days before the expiration of the equipment calibration, continue to notify the custodians of the equipment and the calibrators need to calibrate the equipment.Calibrate all measuring instruments throughout the company.